1) The analogue components would cause signal distortion and noise.

2) The signal distortion waveform measured is inevitable due to the impact of the integrator in the voltage measurement system and the self-integral resistance in the current measurement system.

3) The paper discusses digital signal distortion meter with the technology and method of digital signal processing.

4) To overcome the signal distortion caused Crosstalk code, we must increase the equalizer in the receiver to compensate channel properties send resume correct sequence.

5) Signal Distortion Amplifiers have been changed to provide a bonus to both ECM strength and optimal range and their bonuses adjusted accordingly.

6) The existence of transmission tube usually causes pressure signal distortion in the weapon pressure measurement.

7) A signal distortion measurement method, which is based on the digital notch filtering technique is proposed.

8) The actual signal distortion levels depend upon input and output signal amplitude, as well as the output load impedance.

9) Dynamic range without signal distortion of D/A converter is raised.

10) On the basis, an analysis of the relationships between runout signal distortion, bit error length and foreign substances is given by numerical method.

11) In the area with loose surface, the coupling problem between the vibroseis and the surface is the main factor for vibrating signal distortion.

12) Power back-off is often used in traditional PA to avoid from signal distortion when it surpasses the linear region.

13) This paper firstly presents two criteria: residual noise energy and signal distortion criterion to evaluate the degrees of noise suppression and signal distortion.

14) The technique of quasi-synchronous window and its application in signal distortion measurement are introduced in this paper.

15) This technology provides power efficient signal processing techniques for reducing signal distortion and for improving the power performance of a communication system without increasing size and cost.

16) DVI digital video interface has many advantages, such as excellent signal quality, long transmitting distance,[http://sentencedict.com/signal distortion.html] etc. DVI reduces the signal distortion caused by the conversion of A/D and D/A.

17) A discrete frequency interpolator is introduced to solve the problem of signal distortion caused by insufficient A/D sampling rate of digital ultrasonic flaw detector.

18) Furthermore, computer simulation results show that compared with other methods, the adaptive method is a less signal distortion and can be implemented in real time.

19) Usually there is need to use error control coding to detect and correct those transmission errors caused by signal distortion.

20) It also have another conclusion on both in the process of image signal distortion happens, distortion, this is inevitable.

21) Since core-level excitation is not involved in the process related to IPES, signal distortion caused by excitonic effects is not present in IPES.